Have you ever been enjoying a hot shower, and for some reason, you don’t feel the water going down the drain, but instead, you feel it accumulating around your feet? If so, welcome to the club of wet room enthusiasts who wouldn’t bat an eyelid at a soaked bathroom floor. But most importantly, as we fight these odds, it is also important to ensure that our bathroom looks good. A high-rise basin mixer tap provides one of the ways through which your bathroom can be designed. Designer basins can also be upgraded by adding a high-rise basin mixer tap. Besides the elegance of the style, this fixture also provides a powerful and smooth water flow that enhances the use of water in your daily activities.
The most typical cause of water standing in your shower is a blocked drain or wet room shower tray waste that you should clear as soon as possible. Fear not, dear reader; we are on the verge of exploring ways to eliminate the bathtime gloom, regain your shower’s purpose and banish your wet-room blues. Ready? Let's dive in!
Step One: The Battle of the Blockage
Our main focus is the murky and sometimes very slippery realm of shower drain blockage, in which hair, soap buildup, remnants of a conditioner you thought would make you look like you just left the salon, and even the echoes of that off-key song you belted out the previous day can all combine to cause a blockage.
Image Source: bobvilla.com
This means it is time to grab a plunger or a plumbing snake and be ready to channel your inner plumber. These are the survival gear that you are going to wield against the dreadful drain blockages. Get prepared to employ them to dislodge these more than-welcome intruders and leave your water to drain freely.
Note, however, that if you are dealing with a very stubborn blockage, it is okay to call in reinforcements in the form of a plumber. Remember, being a hero does not mean you won’t need backup sometimes!
Step Two: The Cover Conundrum
Having dealt with the blockage, it is now high time to deal with the shower tray waste cover. Beware, friends, because it might have pointy ends and dirt beneath this shiny cover. Get a flat-head screwdriver or a pair of pliers and simply and carefully remove it to see the shower waste beneath.
Image Source: homeserve.com
Inspect the cover for any damage or wear. If it looks worse for wear, replace it faster than you can say "wet room woes." Your shower will thank you for it.
Step Three: Unleash the Cleaning Kraken
Now that we've revealed the culprit of our pooling water, it's time for a deep clean, and you can opt for a cloth or scrubbing brush and prepare to scrub that shower waste like it's auditioning for the lead role in a cleaning commercial.
Image Source: thespruce.com
If it’s really not cooperating, do not hesitate to bring in the backup–baking soda followed by white vinegar is great. Of course, make sure to turn off the water and block the drain before you start to pour it. We're aiming for clean shower waste, not an impromptu science experiment!
Step Four: Snap Back to Reality
Once the shower waste becomes shiny, like the diamond Rihanna sings about, it’s time to restore the waste cover. Remember to also clean the cover before replacing it where it belongs. After all, there's no point in having a squeaky clean shower waste if the cover itself is looking a little worse for wear.
Image Source: thespruce.com
Once the cover is securely in place, run some water to check everything's working smoothly, and if the water drains away faster than a tub of ice cream at a summer barbecue, give yourself a pat on the back. You've just saved your shower from becoming an indoor paddling pool!
Step Five: The Art of Maintenance
It's important to maintain your shower to prevent similar aquatic escapades in the future. Stay alert, clean regularly, and, in extreme cases, look at using a drain hair catcher. It is rather like providing your drain with an experienced bouncer who filters out the passers-by and lets only water into the pipe.
Image Source: realsimple.com
Regularly pour hot water down the drain to break down any burgeoning blockages and keep things flowing and remember, a quick clean every week can save you a big headache down the line!
Frequently Asked Questions About Shower Tray Waste
1) How do you remove shower waste?
When the shower is blocked, you can remove the waste in the following simple steps;
- Gather your tools and cleaning items; flat head screw-driver, drain snake, lubricant, needle-nose pliers, and scrub
- Unclog the drain using the drain snake or a plumber to remove the stubborn grime and hairs
- Lubricate the components of the drain like the screws to remove them
- After removing the drain, it is time to inspect the waste that has been collected in the drain. The drain is designed to collect waste on the side.
- Deep clean the drain using a scrub with white vinegar and baking soda.
- Rinse with clean water
- Inspect the condition of the drain before putting it back. If the screws are too rusty, opt for a new one.
2) How do you remove a shower floor drain?
The shower floor drain is often held in place using a screw. You can use a flat-head screwdriver to unscrew the drain before removing it. Alternatively, you can use a pair of needle-nose pliers to remove the drain.
3) Where is the waste in the shower tray?
The shower tray has a waste outlet that is normally to the left edge of the tray. The waste that never makes it into the shower tray will remain at the top of the tray and is the first thing you see when you look at the tray.
Wrapping Up
By following these steps, we hope that you can prevent a mini flood in your bathroom and keep your feet dry during your morning shower. But remember safety first and always wear gloves when dealing with drain covers and use tools carefully.
Although if at any point you're unsure about anything, don't hesitate to call in the pros; after all, they love a good drain drama! Happy showering!
Featured Image Source: thespruce.com
